After a renovation, dust spreads easily through the whole space and settles even where no work took place. The final clean gives the best result when you prepare for it properly. These general tips will help you avoid repeat work and unnecessary costs.
Why post-renovation cleaning is harder than usual
Construction dust is very fine: it stays in the air for hours, gets into cabinets and ventilation, and settles again on surfaces that are already clean. On top of that come traces of paint, filler, glue and mounting foam, which household products do not always remove easily.
That is why this kind of cleaning usually happens in several stages: first the waste and main dust are removed, then surfaces are washed, and finally the details get attention.
Finish the dirty work
Plan the cleaning for a time when all dusty work is complete. If someone drills a wall or sands a threshold afterwards, part of the job will have to be repeated.
Before agreeing on a date, check with the tradespeople whether any small finishing jobs remain. Ask separately about fitting skirting boards, curtain rails and light fixtures, as these are often done last.
Remove leftover materials
Clear away construction waste, tools, packaging and bags of mixes to free up access to the floors and walls. Check who is responsible for waste removal: many apartment buildings have separate rules for this.
- Take out large debris and bags before the cleaning starts.
- Store leftover paint and solvents closed and separately.
- Remove protective film carefully, so its dust does not spread around the room.
Air out the rooms
Ventilation helps get rid of the smell of paint and reduces the amount of dust in the air. Open the windows for a few hours before and during the cleaning, if the weather allows. Keep doors closed between rooms still being worked on and clean areas.
Do not rush to sweep
A broom only lifts fine dust into the air. The main dust is usually removed with a construction vacuum cleaner with a suitable filter, followed by wet cleaning. A household vacuum may not cope with this load, so check that yours is designed for it.
Check for marks on surfaces
Before washing, walk around the space and note what needs to be removed.
- Paint drips on glass, tiles and door hardware.
- Residue from mounting foam and glue.
- Cement haze on tiles.
- Protective stickers on windows and appliances.
Do not use abrasive sponges or blades on unfamiliar surfaces without testing on an inconspicuous spot. Scratches on glass, glossy tiles or laminate cannot be washed away later.
Think about the order of work
Cleaning usually goes from top to bottom: the ceiling and upper walls, light fixtures, curtain rails, windows, furniture and only then the floor. This way, settling dust does not land on areas that are already clean.
Wipe the inside of built-in cabinets and drawers before putting things away. Do not forget ventilation grilles, radiators and the space behind them.
When to bring in furniture and belongings
It is easiest to bring in furniture and textiles after the main cleaning. Curtains, carpets and upholstered furniture readily absorb fine dust. If the furniture is already in place, cover it with film during the work.
A short checklist
- Make sure all dusty work is finished.
- Remove waste and tools.
- Air out the rooms.
- Note traces of paint, foam and glue.
- Clean from top to bottom.
- Bring in furniture and textiles last.
This is a demo article containing general tips only.